3Com S7906E Configuration Manual page 1873

No. Attribute
40 Acct-Status-Type
45 Acct-Authentic
60 CHAP-Challenge
61 NAS-Port-Type
79 EAP-Message
Message-Authent
80
icator
87 NAS-Port-Id
Type of the Accounting-Request packet, which can be:
1: Start
2: Stop
3: Interium-Update
4: Reset-Charge
7: Accounting-On (Defined in 3GPP, the
Project )
8: Accounting-Off (Defined in 3GPP)
9-14: Reserved for tunnel accounting
15: Reserved for failed
Authentication method used by the user, which can be:
1: RADIUS
2: Local
3: Remote
CHAP challenge generated by the NAS for MD5 calculation during CHAP
authentication
Type of the physical port of the NAS that is authenticating the user, which
can be:
15: Ethernet
16: Any type of ADSL
17: Cable (with cable for cable TV)
201: VLAN
202: ATM
If the port is an ATM or Ethernet one and VLANs are implemented on it,
the value of this attribute is 201.
Used for encapsulating EAP packets to allow the NAS to authenticate
dial-in users via EAP without having to understand the EAP protocol
Used for authentication and checking of authentication packets to
prevent spoofing Access-Requests. This attribute is used when RADIUS
supports EAP authentication.
String for describing the port of the NAS that is authenticating the user
2-2
Description
3rd Generation Partnership