Entering System View; Exiting The Current View; Exiting To User View - 3Com S7906E Configuration Manual

Configuring the Device Name
Configuring the System Clock
Enabling/Disabling the Display of Copyright Information
Configuring a Banner
Configuring CLI Hotkeys
Configuring Command Aliases
Configuring User Privilege Levels and Command Levels
Displaying and Maintaining Basic Configurations

Entering System View

After you log in to the device, you will automatically enter user view. At this time, the system displays
<Device name>. You can perform limited operations in user view, such as display operations, file
operations, and Telnet operations. To perform further configurations of the device, enter system view.
Follow the step below to enter system view:
To do...
Enter system view from user
view

Exiting the Current View

The system divides the command line interface into multiple command views, which adopts a
hierarchical structure. For example, there is system view under user view, and interface view and VLAN
view under system view. After you have configured the functions under the current view, you can
perform the following operations to exit the current view.
Follow the step below to exit the current view:
To do...
Return to an upper level view
from the current view

Exiting to User View

This feature allows you to return to user view easily from any non user view, without the need to execute
the quit command repeatedly. You can also use the hot key Ctrl+Z to return to user view from the
current view.
Follow the step below to exit to user view:
To do...
Exit to user view
Use the command...
system-view
Use the command...
quit
Use the command...
return
1-2
Required
Available in user view
Required
If the current view is user view,
the command terminates the
connection between the user
terminal and the device.
Available in any view.
Remarks
Required
Available in any view except user view
Remarks
Remarks