Smart Link Configuration Examples; Single Smart Link Group Configuration Example - 3Com S7906E Configuration Manual

To do...
Clear the statistics about flush
messages

Smart Link Configuration Examples

Single Smart Link Group Configuration Example

Network requirements
As shown in Figure 1-2:
Map VLANs 1 through 10, VLANs 11 through 20, and VLANs 21 through 30 to MSTI 0, MSTI 1, and
MSTI 2 respectively.
Traffic of VLANs 1 through 30 on Device C and Device D are dually uplinked to Device A.
Configure Smart Link on the devices for dual uplink backup, using VLAN 1 (the default) for flush
update.
Figure 1-2 Single smart link group configuration
Configuration procedure
1) Configuration on Device C
# Create VLANs 1 through 30, map VLANs 1 through 10, VLANs 11 through 20, and VLANs 21 through
30 to MSTI 0, MSTI 1, and MSTI 2 respectively, and activate the MST region configuration.
<DeviceC> system-view
[DeviceC] vlan 1 to 30
[DeviceC] stp region-configuration
[DeviceC-mst-region] instance 0 vlan 1 to 10
[DeviceC-mst-region] instance 1 vlan 11 to 20
[DeviceC-mst-region] instance 2 vlan 21 to 30
[DeviceC-mst-region] active region-configuration
[DeviceC-mst-region] quit
Use the command...
reset smart-link statistics
1-11
Remarks
Available in user view