To do...
Clear buffered stop-accounting
requests that get no responses on
a distributed IRF device
Configuring HWTACACS
Except for deleting HWTACACS schemes and changing the IP addresses of the HWTACACS servers,
you can make any changes to HWTACACS parameters, no matter whether there are users online or
not. This is different from RADIUS.
Creating an HWTACACS scheme
The HWTACACS protocol is configured on a per scheme basis. Before performing other HWTACACS
configurations, follow these steps to create an HWTACACS scheme and enter HWTACACS scheme
view:
To do...
Enter system view
Create an HWTACACS
scheme and enter HWTACACS
scheme view
Up to 16 HWTACACS schemes can be configured.
A scheme can be deleted only when it is not referenced.
Specifying the HWTACACS Authentication Servers
Follow these steps to specify the HWTACACS authentication servers:
Use the command...
reset stop-accounting-buffer
{ radius-scheme
radius-server-name | session-id
session-id | time-range start-time
stop-time | user-name user-name }
[ chassis chassis-number slot
slot-number ]
Use the command...
system-view
hwtacacs scheme
hwtacacs-scheme-name
1-35
Remarks
Available in user view
Remarks
—
Required
Not defined by default