3Com S7906E Configuration Manual page 1916

Offline detect period is 180s
Quiet period is 180s.
Server response timeout value is 100s
The max allowed user number is 2048 per slot
Current user number amounts to 1
Current domain is 2000
Silent Mac User info:
MAC ADDR
GigabitEthernet2/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 1, failed: 0
Max number of on-line users is 1024
Current online user number is 1
MAC Addr
00e0-fc12-3456
<Device> display connection
Slot: 2
Index=29 ,Username=aaa@2000
IP=N/A
MAC=00e0-fc12-3456
Total 1 connection(s) matched on slot 2.
Total 1 connection(s) matched.
ACL Assignment Configuration Example
Network requirements
As shown in Figure
MAC authentication to access the Internet.
Specify to use the MAC address of a user as the username and password for MAC authentication
of the user.
Configure the RADIUS server to assign ACL 3000.
On port GigabitEthernet 2/0/1 of the switch, enable MAC authentication and configure ACL 3000.
After the host passes MAC authentication, the RADIUS server assigns ACL 3000 to port
GigabitEthernet 2/0/1 of the switch. As a result, the host can access the Internet but cannot access the
FTP server, whose IP address is 10.0.0.1.
From Port
Authenticate state
MAC_AUTHENTICATOR_SUCCESS
1-3, a host is connected to port GigabitEthernet 2/0/1 of the switch and must pass
Port Index
Auth Index
29
1-8