Modem Attribute Configuration - 3Com S7906E Configuration Manual

Figure 4-2 Set the telephone number
Figure 4-3 Call the modem
Step 5: Provide the password when prompted. If the password is correct, the prompt (such as
<S7902E>) appears. You can then configure or manage the switch. You can also enter the character ?
at anytime for help. Refer to the following chapters for information about the configuration commands.
If you perform no AUX user-related configuration on the switch, the commands of level 3 are available
to modem users.

Modem Attribute Configuration

You can configure the attributes of the modem directly connected to the console port of your switch.
This modem is called the switch-side modem.
4-4