Configuring The Device As An Ssh Client; Ssh Client Configuration Task List - 3Com S7906E Configuration Manual

To do...
Enable the SSH server to
support SSH1 clients
Set the RSA server key pair
update interval
Set the SSH user
authentication timeout period
Set the maximum number of
SSH authentication attempts
Authentication will fail if the number of authentication attempts (including both publickey and password
authentication) exceeds that specified in the ssh server authentication-retries command.

Configuring the Device as an SSH Client

SSH Client Configuration Task List

Complete the following tasks to configure an SSH client:
Specifying a Source IP address/Interface for the SSH client
Configuring Whether First-time Authentication is Supported
Establishing a Connection Between the SSH Client and the Server
Use the command...
ssh server compatible-ssh1x
enable
ssh server rekey-interval
hours
ssh server
authentication-timeout
time-out-value
ssh server
authentication-retries times
Task
1-10
Remarks
Optional
By default, the SSH server
supports SSH1 clients.
Optional
0 by default, that is, the RSA
server key pair is not updated.
Optional
60 seconds by default
Optional
3 by default
Remarks
Optional
Optional
Required