Displaying And Maintaining Acfp; Configuring Acfp Client (Oap Card) - 3Com S7906E Configuration Manual

For the detailed description of the snmp-agent trap enable command, refer to the SNMP Commands
in the System Volume.

Displaying and Maintaining ACFP

To do...
Display the configuration
information of the ACFP server
Display the configuration
information of an ACFP client
Display the configuration
information of an ACFP policy
Display ACFP rule
configuration information
Display the configuration
information of the ACFP trap
function

Configuring ACFP Client (OAP Card)

You need to configure the ACFP collaboration policy and ACFP collaboration rules on the ACFP client,
namely, the OAP card through MIB. The specific configuration depends on the service software used on
the ACFP client. For the configuration of the OAP card, refer to the related manual of the ordered OAP
card.
Use the command...
display acfp server-info
display acfp client-info [ client-id ]
display acfp policy-info [ client client-id
[ policy-index ] | dest-interface
interface-type interface-number |
in-interface interface-type
interface-number | out-interface
interface-type interface-number ] [ active
| inactive ]
display acfp rule-info { in-interface
[ interface-type interface-number ] |
out-interface [ interface-type
interface-number ] | policy [ client-id
policy-index ] }
display snmp-agent trap-list
1-7
Remarks
Available in any view