Configuring Optional Parameters Common To An Nqa Test Group - 3Com S7906E Configuration Manual

To do...
Set the lifetime of the
history records in an NQA
test group
Configure the maximum
number of history records
that can be saved in a test
group

Configuring Optional Parameters Common to an NQA Test Group

Optional parameters common to an NQA test group are valid only for tests in this test group.
Unless otherwise specified, the following parameters are applicable to all test types and they can be
configured according to the actual conditions.
Follow these steps to configure optional parameters common to an NQA test group:
To do...
Enter system view
Enter NQA test group view
Enter test type view of a test
group
Configure the descriptive string
for a test group
Configure the interval between
two consecutive tests for a test
group
Configure the number of
probes in an NQA test
Use the command...
history-record keep-time keep-time
history-record number number
Use the command...
system-view
nqa entry admin-name
operation-tag
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | snmp | tcp |
udp-echo | udp-jitter | voice }
description text
frequency interval
probe count times
1-22
Remarks
Optional
By default, the history
records in the NQA test
group are kept for 120
minutes.
Optional
By default, the maximum
number of records that can
be saved in a test group is
50
Remarks
—
—
—
Optional
By default, no descriptive string
is available for a test group.
Optional
By default, the interval between
two consecutive tests for a test
group is 0 milliseconds, that is,
only one test is performed.
If the last test is not completed
when the interval specified by
the frequency command is
reached, a new test is not
started.
Optional
By default, one probe is
performed in a test.
Only one probe can be made in
one voice test. Therefore, this
command is not available in a
voice test.