Step-By-Step Patch Installation; Step-By-Step Patch Installation Task List; Configuring The Patch File Location - 3Com S7906E Configuration Manual

To do...
Enter system view
Install the patches in one step
The patch matches the card type and software version.
The patch install command changes the patch file location specified with the patch location
command to the directory specified by the patch-location argument of the patch install command.

Step-by-Step Patch Installation

Step-by-Step Patch Installation Task List

Configuring the Patch File Location

Loading a Patch File
Activating Patches
Confirming Running Patches
Configuring the Patch File Location
If you save the patch files to other storage media except the flash on the device, you need to specify the
directory where the patch files locate with the patch-location argument. Then the system loads the
appropriate patch files from the specified directory. If the device has only one storage medium, you do
not need to execute this command.
Follow these steps to configure the patch file location:
To do...
Enter system view
Configure the patch file location
Use the command...
system-view
patch install patch-location
Task
Use the command...
system-view
patch location patch-location
1-6
Remarks
—
Required
Remarks
Optional
Required
Required
Optional
Remarks
—
Optional
flash: by default