To do...
Specify a security policy
server
You can specify up to eight security policy servers for a RADIUS scheme.
Enabling the Listening Port of the RADIUS Client
Follow these steps to enable the listening port of the RADIUS client:
Enter system view
Enable the listening port of the RADIUS
client
Configuring Interpretation RADIUS Class Attribute as CAR Parameters
According to RFC 2865, a RADIUS server assigns the RADIUS class attribute (25) to a RADIUS client.
However, the RFC only requires the RADIUS client to send the attribute to the accounting server; it
does not require the RADIUS client to resolve the attribute. Currently, some RADIUS servers use the
class attribute to deliver the assigned committed access rate (CAR) parameters. To support such
applications, you need to configure the RADIUS client to interpret the class attribute as the CAR
parameters.
Follow these steps to configure the RADIUS client to interpret the class attribute as the CAR
parameters:
To do...
Enter system view
Enter RADIUS scheme view
Specify to interpret the class
attribute as the CAR parameters
Use the command...
security-policy-server
ip-address
To do...
Use the command...
system-view
radius scheme
radius-scheme-name
attribute 25 car
Use the command...
system-view
radius client enable
1-33
Remarks
Optional
Not specified by default
Remarks
—
Optional
Enabled by default
Remarks
—
—
Required
Be default,
RADIUS attribute 25 is
not interpreted as CAR
.
parameters