3Com S7906E Configuration Manual page 2295

To do...
Enter the
default ISP
domain view
Specify the
AAA scheme
Configure
to be applied
the
to the domain
authentica
tion mode
Quit to
system view
Create a local user (Enter
local user view.)
Set the authentication
password for the local user
Specifies the level of the
local user
Specify the service type
for AUX users
Note that, when you log in to an Ethernet switch using the scheme authentication mode, your access
rights depend on your user level defined in the AAA scheme.
When the local authentication mode is used, the user levels are specified using the
authorization-attribute level level command.
When the RADIUS or HWTACACS authentication mode is used, the user levels are set on the
corresponding RADIUS or HWTACACS servers.
For more information about AAA, RADIUS, and HWTACACS, see AAA Configuration in the Security
Volume.
Use the command...
domain domain name
authentication default
{ hwtacacs- scheme
hwtacacs-scheme-name [ local ] |
local | none | radius-scheme
radius-scheme-name [ local ] }
quit
local-user user-name
password { simple | cipher }
password
authorization-attribute level
level
service-type terminal
2-10
Remarks
Optional
By default, the local AAA scheme
is applied. If you specify to apply
the local AAA scheme, you need
to perform the configuration
concerning local user as well.
If you specify to apply an existing
scheme by providing the
radius-scheme-name argument,
you need to perform the following
configuration as well:
Perform AAA-RADIUS
configuration on the switch.
(Refer to AAA Configuration in
the Security Volume
details.)
Configure the user name and
password accordingly on the
AAA server. (Refer to the user
manual of AAA server.)
Required
No local user exists by default.
Required
By default, a user is authorized
with no password
By default, no authorization
attribute is configured for a local
user
Required
By default, a user is authorized
with no service
for