Telnet Login Configuration Task List - 3Com S7906E Configuration Manual

Common Configuration
Table 3-2 lists the common Telnet configuration.
Table 3-2 Common Telnet configuration
Configuration
Enter system view
Make the switch to operate as a Telnet
Server
Enter one or more VTY user interface
views
VTY user
interface
configuration
VTY terminal
configuration

Telnet Login Configuration Task List

Telnet login configurations vary when different authentication modes are adopted.
Configure the
command level
available to users
logging in to the VTY
user interface
Configure the
protocols the user
interface supports
Set the command that
is automatically
executed when a user
logs into the user
interface
Make terminal services
available
Set the maximum
number of lines the
screen can contain
Set history command
buffer size
Set the timeout time of
a user interface
system-view
telnet server enable
user-interface vty
first-number
[ last-number ]
user privilege level level
protocol inbound { all |
ssh | telnet }
auto-execute command
text
shell
screen-length
screen-length
history-command
max-size value
idle-timeout minutes
[ seconds ]
3-4
Remarks
—
By default, a switch does
not operate as a Telnet
server
—
Optional
By default, commands of
level 0 are available to
users logging in to a VTY
user interface.
Optional
By default, Telnet and SSH
protocol are supported.
Optional
By default, no command is
automatically executed
when a user logs into a user
interface.
Optional
By default, terminal
services are available in all
user interfaces
Optional
By default, the screen can
contain up to 24 lines.
Optional
By default, the history
command buffer can
contain up to 10
commands.
Optional
The default timeout time is
10 minutes.