Troubleshooting Ipv6 Bgp Configuration; No Ipv6 Bgp Peer Relationship Established - 3Com S7906E Configuration Manual

S7900e family release 6600 series

Hide thumbs Also See for S7906E:

Command reference manual (2327 pages)

Getting started manual (155 pages)

Datasheet (8 pages)

Table of Contents

[SwitchA] ipv6

[SwitchA] bgp 100

[SwitchA-bgp] router-id 1.1.1.1

[SwitchA-bgp] ipv6-family

[SwitchA-bgp-af-ipv6] peer 100::2 as-number 200

[SwitchA-bgp-af-ipv6] network 1:: 64

#Configure Switch B.

<SwitchB> system-view

[SwitchB] ipv6

[SwitchB] bgp 200

[SwitchB-bgp] router-id 2.2.2.2

[SwitchB-bgp] ipv6-family

[SwitchB-bgp-af-ipv6] peer 100::1 as-number 100

[SwitchB-bgp-af-ipv6] peer 101::1 as-number 200

[SwitchB-bgp-af-ipv6] peer 101::1 next-hop-local

# Configure Switch C.

<SwitchC> system-view

[SwitchC] ipv6

[SwitchC] bgp 200

[SwitchC-bgp] router-id 3.3.3.3

[SwitchC-bgp] ipv6-family

[SwitchC-bgp-af-ipv6] peer 101::2 as-number 200

[SwitchC-bgp-af-ipv6] peer 102::2 as-number 200

# Configure Switch D.

<SwitchD> system-view

[SwitchD] ipv6

[SwitchD] bgp 200

[SwitchD-bgp] router-id 4.4.4.4

[SwitchD-bgp] ipv6-family

[SwitchD-bgp-af-ipv6] peer 102::1 as-number 200

Configure route reflector

# Configure Switch C as a route reflector, Switch B and Switch D as its clients.

[SwitchC-bgp-af-ipv6] peer 101::2 reflect-client

[SwitchC-bgp-af-ipv6] peer 102::2 reflect-client

Use the display bgp ipv6 routing-table command on Switch B and Switch D respectively, you can find

both of them have learned the network 1::/64.