Configuring Qos In An Epon System; Qos Configuration Task List In An Epon System - 3Com S7906E Configuration Manual

Configuring QoS in an EPON System

QoS Configuration Task List in an EPON System

QoS configurations in an EPON system are the same as those in Ethernet, and the corresponding
configuration commands in OLT port view and ONU port view are the same as those in Ethernet port
view too. For detailed configuration, refer to the corresponding chapters above.
Table 12-1 and Table 12-2
system.
Table 12-1 Configure QOS at the OLT side of an EPON system
Configure QoS for uplink
traffic
Configure QoS for
downlink traffic
show how to configure QoS for downlink traffic and uplink traffic in an EPON
QoS at the OLT side
Configure priority mapping on
the OLT
Configuring priority trust mode
for the OLT port
Configure traffic policing for
uplink traffic of all ONUs
(through QoS)
Configure congestion
management on the uplink port
Configure the OLT to perform
priority mapping for traffic
received on an uplink port
Configure congestion
management (SP and WRR) on
the downlink OLT port
Configure the high-priority
queue buffer for the specified
ONU
Configure line rate and traffic
shaping for downlink traffic
Assign downlink bandwidth for
each ONU
Reference
Modify the priority mapping on the
OLT port
Configuring the Priority Trust Mode
on a Port
Configuring Traffic Policing
Configuring SP Queuing
Configure WRR Queuing
Configuring WFQ Queuing
Configuring SP+WRR Queues
Modify the priority mapping on the
OLT port
Configuring SP Queuing
Configure WRR Queuing
Configuring WFQ Queuing
Configuring SP+WRR Queues
Sending buffer size of the OLT port
Configuring GTS
Configuring the Line Rate
Assign downlink bandwidth for an
ONU
6