Table 31: Controller Led Status And Description (Front Panel); Figure 194: Led Alarm Assembly Front Display - Oracle FS1-2 Customer Service Manual

Figure 194: LED alarm assembly front display

Legend
1 Chassis identification LED or Locator
LED
2 Service Action Required LED or
Caution or Fault LED
3 Motherboard or Power or OK LED
4 Power switch
The following table provides status information on the LEDs on the front display
panel of the LED alarm assembly on the Controller:

Table 31: Controller LED status and description (front panel)

No. LED
1
Chassis
identification LED
or
Locator LED
button
2
Service Action
Required LED
5 Service processor LEDs
6 Back power supply LED
7 Fault or Alarm LEDs (Critical, Major,
Minor)
8 User Alarm LED
LED color Status
White The Locator LED can be turned on to
identify a particular system. When on,
the LED blinks rapidly. Pressing and
holding the Locator button for 5
seconds lights up all the LEDs that are
controlled by ILOM for 15 seconds.
Amber Indicates that service is required.
Under some fault conditions,
individual component fault LEDs are
turned on in addition to the Service
Required LED.
Oracle FS System LED Status
242