Trace Window - Renesas Compact Emulator M34571T2-CPE User Manual

M34571T2-CPE User's Manual

3.4 Trace Window

(1) Trace window
1. Trace window
Menu
Windows Trace Window
REJ10J0972-0100 Rev.1.00 February 10, 2006
Menu item
Opens the trace window.
Function
Trace window
The trace window is used to show the results of real-time
trace measurements. It has the following three display
modes:
- Bus mode
Bus information per cycle can be inspected. The contents
are displayed in order of execution paths.
- Disassemble mode
The execution paths of the executed instructions can be
inspected. The contents are displayed in order of
execution paths.
- Source mode
The execution paths of the source program can be
inspected.
These modes can be switched over using the respective
toolbar buttons.
The trace window shows the measurement result when a
real-time trace measurement has finished. The trace
window remains blank until the real-time trace
measurement in progress finishes.
3. Usage (How to Use the Emulator Debugger)
Page 49 of 72