Table of Contents
Advertisement
2.2
Specific Functions for the Emulator when Using the SH7362
2.2.1
Event Condition Functions
The emulator is used to set 12 event conditions (Ch1 to Ch12) and the software trace. Table 2.4
lists the conditions of Event Condition.
Table 2.4 Types of Event Conditions
Event Condition Type
Address bus condition (Address)
Data bus condition (Data)
Bus state condition
(Bus State)
Window address condition
System bus
LDTLB instruction event condition
Count
Branch trace condition
(Branch trace)
Software trace
Action
Table 2.5 lists the combinations of conditions that can be set under Ch1 to Ch12 and the software
trace.
20
Description
Breaks when the SH7362 address bus value or the program
counter value matches the specified value.
Breaks when the SH7362 data bus value matches the
specified value. Byte, word, or longword can be specified as
the access data size.
There are two bus state condition settings:
Bus state condition: Breaks or acquires a trace when the
data bus or the X-Bus or Y-Bus address bus of the SH7362
is matched.
Read/Write condition: Breaks or acquires a trace when the
specified read/write condition is matched.
Breaks or acquires a trace when the data in the specified
memory range is accessed.
Breaks or acquires a trace when the address or data on the
system bus is matched.
Breaks when the SH7362 executes the LDTLB instruction.
Breaks when the conditions set are satisfied the specified
number of times.
Breaks or acquires a trace when a branch occurs with the
condition specified by the SH7362. (By default, trace
acquisition is enabled).
Selects whether or not the software trace is acquired.
Selects the operation when a condition, such as setting a
break, trace, or performance start or end, is matched.
Advertisement
Table of Contents
