2.2.5
Connecting the E200F External Bus Trace Unit, Emulation Memory Unit, and EV-
chip Unit
• When the external bus trace unit is used with the emulation memory unit and EV-chip unit, as
shown in figure 2.8, connect them in the positions of (a), (b), and (c) for the external bus trace
unit, emulation memory unit, and EV-chip unit, respectively.
• After checking the location of pin 1, connect the external bus trace unit, emulation memory
unit, and EV-chip unit.
Figure 2.8 Connecting the External Bus Trace Unit, Emulation Memory Unit, and EV-chip
Check the orientation of pin 1 and the position of each
unit before connecting parts.
Section 2 Connecting the Emulator to the User System
Unit
CAUTION
Rev. 4.00 Feb. 18, 2009 Page 15 of 64
REJ10J1662-0400