Supplying A Password For Multipoint Calls; About Multipoint Viewing Modes - Polycom HDX Desktop Systems User Manual

Supplying a Password for Multipoint Calls

About Multipoint Viewing Modes

© Polycom, Inc.
Hosts of multipoint calls sometimes require you to enter a password in order
to join a conference. Depending on your system configuration, you can set up
the system to enter the meeting password for you. Contact your system
administrator for more information.
To configure a meeting password:
1. Press
Home to switch to the home screen if a computer is connected.
2. Select System from the Place a Call screen.
3. Select User Settings from the System screen.
4. Enter the password in the Meeting Password field in one of these ways:
— Press the keypad number buttons, using the text-entry method
commonly used with cell phones.
— Press Keyboard to use the onscreen keyboard to enter
characters.
5. Press
Home to save your change and return to the home screen.
If you need to generate touch tones (DTMF tones), press
press and choose Touch Tones. Then use the keypad number buttons.
What you see during a multipoint call can vary depending on how the
Polycom HDX system is configured, the number of sites participating, and
whether content is shared. The multipoint viewing mode configured on the
host system is the one used in the call. To find out more about these modes,
please talk to the administrator of your Polycom HDX system. The following
table describes the different multipoint viewing modes.
User's Guide for Polycom HDX Desktop Systems
on the keypad, or
25