Figure 2-12 Meeting Composer Conference List For A Multipoint Call - Polycom RealPresence Experience RPX HD User Manual

To make and hang up a multipoint call:
Ensure that the sites listed in the Conference List include all the sites you
1
want to call:
— If you want to delete a site, simply touch that site's name in the list.
— If you want to delete all the sites, touch the
— If you want to add another site, refer to
Composer on page 2-10.
Figure 2-12 Meeting Composer Conference List for a Multipoint Call —
Touch Connect.
2
As the sites are connecting, status messages appear at the top of the
Conference List. Each message is automatically cleared after five seconds.
Once the conference starts, the Conference List displays the list of sites in
the conference as well as the
You can then do the following:
3
— To drop a site from the conference, simply touch that site's name in the
list.
— To end the conference, touch
Selecting Sites Using Meeting
Enhanced UI (Not in a Call)
Hang Up button.
Using the Touch Panel
Clear button.
Hang Up.
2–17