Serial V.35/Rs-449/Rs-530 Network Interface Status Lights; Configuring Isdn And Other Network Interface Settings; Configuring The Bri Network Interface - Polycom HDX 4000 Series Administrator's Manual

Serial V.35/RS-449/RS-530 Network Interface Status Lights

Configuring ISDN and Other Network Interface Settings

Configuring the BRI Network Interface

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The network interface lights are located on the network interface module.
Interface Light State
Lights are off
Yellow light is on
Yellow and green lights are on
You can configure a network interface option if the corresponding network
interface module is installed. The system automatically detects the type of
interface installed and displays only the required configuration screens.
Polycom HDX systems do not support multilink BRI connections.
To configure the ISDN network interface settings:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Network >
ISDN (select if necessary).
— In the web interface, go to Admin Settings > Network > ISDN.
Description
One of the following:
• No power to the system.
• The system is not communicating
with the network.
• The system is restarting.
The system is receiving a clock signal
from the network (able to make a call).
The system is in a call.
Networks
2–29