Configuration Preparations; Obtaining Network Information; Obtaining Product Activation Key - Polycom RMX 1000 Started Manual

Configuration Preparations

Obtaining Network Information

Before the first time configuration, obtain the following information
from the network administrator. This helps you to configure the RMX
1000 in your local network:
•
The IP address, subnet mask, and default gateway IP address of the
RMX 1000 LAN port
•
(Optional) Gatekeeper address, and the H.323 prefix and E.164
number to be assigned to the RMX 1000

Obtaining Product Activation Key

Before using the RMX 1000, you need to register and activate the device.
Follow the procedure below to obtain the product activation key. When
you power on and log in to the RMX 1000 for the first time, the system
displays the Product Activation dialog box, requesting you to enter a
Product Activation Key.
1
Enter http://portal.polycom.com in the address bar of the browser
to access the login page of the Polycom resource center.
2
In the login box, enter your Email address and password, and then
click Sign In. If you are a new user, click the Register for an Ac-
count link for registration.
3
Click Service & Support in the upper navigation bar on the inter-
face. On the Service & Support page, click Product Activation in the
left navigation bar.
3