Procedure 4: Modifying The Default Ip Service And Isdn/Pstn Network Service Settings - Polycom RMX 2000 Getting Started Manual

Procedure 4: Modifying the Default IP Service and ISDN/
PSTN Network Service Settings
The system prompts with a restart dialog box:
7
In the dialog box, click No.
As no Default IP Network Service is defined, the system automatically
starts the Fast Configuration Wizard.
The Fast Configuration Wizard enables you to configure the Default IP
Service. It starts automatically if no Default IP Network Service is defined.
This happens during First Time Power-up, before the service has been
defined or if the Default IP Service has been deleted, followed by an RMX
restart.
The IP Management Service tab in the Fast Configuration Wizard is enabled
only if the factory default Management IP addresses were not modified.
Polycom RMX 2000 Getting Started Guide
2-11