Configuration Preparations; Obtaining Network Information; Obtaining Product Activation Key - Polycom RMX 1000 Getting Started Manual

Put the RMX 1000 on a safe, even, and clean surface.
–
3 Connect cables on the back panel of the RMX 1000:
Power Cable: Firmly insert the plug into the power socket to
–
prevent poor contact.
LAN Cable: Connect to the LAN1 port of the RMX 1000.
–
If you want to shut off the device, please first turn off the power
switch. Do not directly cut off the power supply or unplug the power
cable.

Configuration Preparations

Obtaining Network Information

Before the first time configuration, obtain the following information
from the network administrator. This helps you to configure the RMX
1000 in your local network:
•
Confirm the IP network type (H.323, SIP or H.323&SIP) and related
configuration information.
•
The IP address, subnet mask, and default gateway IP address of the
RMX 1000 LAN port.
•
(Optional) DNS server address.
•
(Optional) Gatekeeper address, and the H.323 prefix and E.164
number to be assigned to the RMX 1000.
•
(Optional) SIP server address.

Obtaining Product Activation Key

Before using the RMX 1000, you need to register and activate the device.
Follow the procedure below to obtain the product activation key. When
you power on and log in to the RMX 1000 for the first time, the system
displays the Product Activation dialog box, requesting you to enter a
Product Activation Key.
3