How To Place A Video Call; Placing An Isdn Video Call - Polycom VIEWSTATION Training Manual

End-User Training Guide: ViewStation

HOW TO PLACE A VIDEO CALL

The Polycom ViewStation can run over two different types of networks -
ISDN and IP.

Placing an ISDN Video Call

1. Use the arrow buttons on the Remote Control and move
2. Press the SELECT button (the oval button in the center of
3. The Video Phone Screen will appear.
Video Call icon.
On screen, the ViewStation shows you status of
your video channel connection
Tips & Tricks #2
Here are some number inputting tips!
If the second number is one digit greater than the first, press the RIGHT arrow
when your screen is at the second dialing box.
If the second number is the same as the first, press the DOWN arrow when
your screen is at the second dialing box.
If you make mistakes during input use LEFT arrow to delete/backspace.
Tips & Tricks #3
Dialing Troubleshoot Tip: Due to ISDN network traffic at certain times networks
can become overloaded. Try your call at least three times. If your call still does
not connect, have the party you are calling initiate to you.
to the Video Call icon.
arrows).
.
4. Using the numeric keypad
on your Remote, enter
your number. (Be sure to
input "1" before the area
code domestically and
"011" internationally.)
Note: Some calls require
the input of two ISDN
numbers.
5. Press the SELECT button
after numbers are entered
to place call.
VSGi - Polycom ViewStation End-user Training Guide
For more
information
call
408-402-9000
6