Installing And Removing The Usb Devices; Installing The Usb Devices; Removing The Usb Devices - Mitsubishi Electric GOT SIMPLE Series Operation Manual

7.8

Installing and Removing the USB Devices

The following shows the procedure for installing and removing a USB device.
Connecting the USB hub devices to the USB interface (Host)
When connecting the devices to the USB interface (Host) using USB hub with the GOT power on, drive
assignment of connected USB devices may be changed. To use the USB hub devices, turn on the GOT with
the devices connected.

Installing the USB devices

GS2512-WXTBD
The following shows the procedure for installing a USB device.
1.
Insert the USB device to the USB interface (Host) as shown below.
Make sure to insert the USB interface connector in the correct direction.

Removing the USB devices

GS2512-WXTBD
The following shows the procedure for removing the USB device.
1.
Place the USB device in removable mode. For the setting method, refer to the following.
GOT2000 Series User's Manual (Utility)
2.
Remove the USB device from the USB interface (Host) as shown below.
7 INSTALLATION AND REMOVAL
80
7.8 Installing and Removing the USB Devices