Gx Works2; Connecting The Devices Necessary For Setup - Mitsubishi Electric C70 Setup Manual

MITSUBISHI CNC
3 PLC CPU Initial Setup

3.1 GX Works2

3.1.1 Connecting the Devices Necessary for Setup

Connect the personal computer in which the sequence program development/maintenance tool GX Works2 is installed
to the PLC CPU with USB or RS-232C.
(Note 1) When connecting to a personal computer and a module with USB interface, an electric shock or a module
failure may occur depending on the model of a personal computer or the service condition.
Be sure to refer to "Items related to connection" on "Precautions for Safety" before connecting them.
58
QnUD(E)CPU
QnUD(E)HCPU
M EL S EC M EL S EC
POWER POWER
MITSUBISHI MITSUBISHI
GT09-C30USB-5P
GX Works2