Status List - Mitsubishi Electric AE-200A Instruction Book

3-4. Status List

3-4-1. Malfunction List
Touch [Status List] in the menu bar, and then touch [Malfunction].
A list of units that are currently malfunctioning will appear.
Note: The [Controller] setting will appear when the [System Exp] setting on the [Unit Info.] screen is set to [Expand]. Switch the
[Controller] setting between [AE200], [AE1], [AE2], and [AE3] to display the list for each AE-200 and AE-50 individually.
Controller
Select [AE200] to display
the list for AE-200, and
select [AE1], [AE2], or [AE3]
to display the list for each
AE-50.
Floor name or block name
Group name
Unit address
Item
Floor name or block name
Group name
Unit address
Number of units in error
All Reset
Error code
WT07190X01
The name of the floor or the block that the unit in error belongs to will appear.
Note: The floor or block name will be blank if the unit in error is a unit that does not belong
to any block or floor.
The name of the group that the unit in error belongs to will appear.
Note: The group name will be blank if the unit in error is a unit that does not belong to any
group, such as an outdoor unit or a system controller.
The address of the unit in error will appear.
Note: When [AE1], [AE2], or [AE3] is selected as [Controller], AE-50 No. and unit address
will appear. (Example: 1-012)
The number of malfunctioning units will appear.
Touch to reset all errors at once.
Note: The units whose error has been reset will stop.
The error code that corresponds to the error will appear.
Touch the error code to display the definition.
48
Description
Number of units in error
Number of units whose
filter sign is turned on
Error code
All Reset
Touch to reset all errors at
once.