YASKAWA GA700 Technical Manual page 62

2.9 Change the Drive Enclosure Type
A - Screw holes on sides
B - Conduit bracket 1
Figure 2.53 shows the locations of the screw holes on the bottom of the drive.
A - Front of drive
3.
Align the screw holes on conduit bracket 2 with the screw holes on conduit bracket 1.
Tighten the screws to a tightening torque of 0.98 N∙m to 1.33 N∙m (8.67 lb.∙in. to 11.77 lb.∙in.).
A - Conduit bracket 2
Figure 2.55 shows the locations of the screw holes on the bottom of conduit bracket 1.
62
Figure 2.52 Attach Conduit Bracket 1
Figure 2.53 Locations of Screw Holes on Bottom
Figure 2.54 Attach Conduit Bracket 2
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
C - Screws A
D - Screws B
B - Screw holes on bottom