YASKAWA GA700 Technical Manual page 416

7.4 Replace a Cooling Fan and Circulation Fan
2.
Align the notches on the fan with the pins on the drive and install the cooling fan in the drive.
A - Notch on fan
B - Alignment pins on drive
Note:
When you install the cooling fan, make sure that you do not pinch cables between the cooling fan and the drive.
3.
Put the cable in the recess of the drive.
A - Front of drive
4.
Hold the fan finger guard at an angle and put the connector tabs on the fan finger guard into the holes on
the drive.
A - Front of drive
B - Drive holes
416
C - Front of drive
Figure 7.30 Install the Cooling Fan
Figure 7.31 Put the Cable in the Drive Recess
C - Connector tabs
Figure 7.32 Reattach the Fan Finger Guard
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual