3.6 Keypad Operation
6.
Push
or
The keypad shows "End" when the backup procedure completes successfully.
◆
Write Backed-up Parameters to the Drive
You can back up parameters on the keypad and write them to different drives.
Note:
• Always stop the drive before you start to restore the parameter backups.
• The drive rejects Run commands while it is restoring parameters.
1.
Push
(Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push
(Menu).
3.
Push
or
4.
Push
or
5.
Push
or
170
to select a memory location, then push
, push
(Back) to show [Home] on
to select [Parameter Backup/Restore], then push
to select the item to restore, then push
to select [Restore (keypad → drive)], then push
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
.
.
.
.
.