YASKAWA GA700 Technical Manual page 893

■
H2-31: Comparator 2 Off-Delay Time
No.
Name
(Hex.)
H2-31 Comparator 2 Off-
Delay Time
(154B)
Note:
Refer to H2-xx = 66 and 67 [MFDO Function Select = Comparator1 and Comparator2] for more information about the comparator
function.
■
H2-32: Comparator 1 Filter Time
No.
Name
(Hex.)
H2-32 Comparator 1 Filter
Time
(159A)
■
H2-33: Comparator1 Protection Selection
No.
Name
(Hex.)
H2-33 Comparator1
Protection Selection
(159B)
0 : Ramp to Stop
The drive ramps to stop in the set deceleration time. Fault relay output terminal MA-MC activates and terminal
MB-MC deactivates.
1 : Coast to Stop
The drive output shuts off and the motor coasts to stop. Fault relay output terminal MA-MC activates and terminal
MB-MC deactivates.
2 : Fast Stop (Use C1-09)
The drive stops the motor in the deceleration time set in C1-09 [Fast Stop Time]. Fault relay output terminal MA-
MC activates and terminal MB-MC deactivates.
3 : Alarm Only
The keypad shows "CP1" and the drive continues operation at the current frequency reference.
Note:
The output terminal set for Alarm [H2-01 to H2-03 = 10] activates.
4 : Digital Output Only
■
H2-34: Comparator 2 Filter Time
No.
Name
(Hex.)
H2-34 Comparator 2 Filter
Time
(159C)
■
H2-35: Comparator2 Protection Selection
No.
Name
(Hex.)
H2-35 Comparator2
Protection Selection
(159D)
0 : Ramp to Stop
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
V/f CL-V/f OLV CLV AOLV
Sets the off-delay time for comparator 2.
V/f CL-V/f OLV CLV AOLV
Sets the time constant that is applied to the primary delay filter used for the
analog output of the monitor selected with H2-20 [Comparator 1 Monitor
Selection].
V/f CL-V/f OLV CLV AOLV
Sets drive operation when it detects CP1 [Comparator1 Limit Fault].
V/f CL-V/f OLV CLV AOLV
Sets the time constant that is applied to the primary delay filter used for the
analog output of the monitor selected with H2-26 [Comparator 2 Monitor
Selection].
V/f CL-V/f OLV CLV AOLV
Sets drive operation when it detects CP2 [Comparator2 Limit Fault].
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
11.8 H: Terminal Functions
Default
(Range)
0.0 s
(0.0 - 600.0 s)
Default
(Range)
0.0s
(0.0 - 10.0 s)
Default
(Range)
4
(0 - 4)
Default
(Range)
0.0s
(0.0 - 10.0 s)
Default
(Range)
4
(0 - 4)
11
893