YASKAWA GA700 Technical Manual page 67

A - Front of drive
3.
Align the screw holes on conduit bracket 2 with the screw holes on conduit bracket 1.
Tighten the screws to a tightening torque of 0.98 N∙m to 1.33 N∙m (8.67 lb.∙in. to 11.77 lb.∙in.).
A - Conduit bracket 2
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
B - Screw holes on bottom
Figure 2.65 Locations of Screw Holes on Bottom
Figure 2.66 Attach Conduit Bracket 2
2.9 Change the Drive Enclosure Type
2
67