YASKAWA GA700 Technical Manual page 904

11.8 H: Terminal Functions
■
1A: During Reverse
Setting Function
1A During Reverse
ON : The motor is operating in the reverse direction.
OFF : The motor is operating in the forward direction or the motor stopped.
■
1B: During Baseblock (N.C.)
Setting Function
1B During Baseblock (N.
C.)
ON : The drive is not in baseblock.
OFF : During baseblock
■
1C: Motor 2 Selected
Setting Function
1C Motor 2 Selected
ON : Motor 2 Selection
OFF : Motor 1 Selection
■
1D: During Regeneration
Setting Function
1D During Regeneration
ON : Motor is regenerating.
OFF : Motor is operating or stopped.
■
1E: Executing Auto-Restart
Setting Function
1E Executing Auto-
Restart
The terminal deactivates when the Auto Restart function automatically resets a fault. The terminal deactivates
when the Auto Restart function detects the fault again because the Auto Restart function cannot operate when the
drive reaches the number of attempts set with L5-01 [Number of Auto Restart Attempts].
Note:
Refer to "L5: Fault Restart" for more information.
904
V/f CL-V/f OLV CLV AOLV
The terminal activates when the motor operates in the reverse direction.
Figure 11.101 Reverse Operation Output Time Chart
V/f CL-V/f OLV CLV AOLV
The terminal deactivates during baseblock. When the drive is in baseblock, the drive output
transistor stops switching and does not make DC bus voltage.
V/f CL-V/f OLV CLV AOLV
The terminal activates when motor 2 is selected.
V/f CL-V/f OLV CLV AOLV
The terminal activates on when the motor is regenerating.
V/f CL-V/f OLV CLV AOLV
The terminal activates when the Auto Restart function is trying to restart after a fault.
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM