Remove And Reattach The Keypad; Remove The Keypad; Reattach The Keypad - YASKAWA GA700 Technical Manual

2.6 Remove and Reattach the Keypad

2.6

Remove and Reattach the Keypad

NOTICE: You must remove the keypad before you remove or reattach the front cover. Before you reattach the keypad, make
sure that you tightly fasten the front cover back into its position. If you keep the keypad connected to the drive when you remove
the front cover, it can cause an unsatisfactory connection and incorrect operation.
◆

Remove the Keypad

1.
Push down the tab on the top of the keypad, then pull the keypad forward and remove it from the drive.
2.
Pull the keypad connector out from the drive horizontally, then put it in the holder.
Note:
Insert the end of the keypad connector that has the tab.
A - Holder
B - Hook
◆

Reattach the Keypad

Insert the keypad connector to its initial position. Put the bottom of the keypad into position first, then carefully
push on the top of the keypad until the hook clicks into place.
44
Figure 2.7 Remove the Keypad
Figure 2.8 Move the Keypad Connector to the Holder
Figure 2.9 Reattach the Keypad
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
C - Keypad connector