YASKAWA GA700 Technical Manual page 678

11.2 A: Initialization Parameters
Sets MFDI terminal S1 to Run, terminal S2 to Stop, and terminal S5 to FWD/REV, and resets all parameters to
default settings.
The drive will not initialize the parameters in
Table 11.2 Parameters that are not Initialized Using a 2-Wire Sequence or a 3-Wire Sequence
No.
A1-00
A1-02
A1-07
E1-03
E5-01
E5-02
E5-03
E5-04
E5-05
E5-06
E5-07
E5-09
E5-11
E5-24
E5-25
F6-08
F6-xx/F7-xx
L8-35
o2-04
q1-xx - q8-xx
r1-xx
Note:
• Set A1-06 [Application Preset] to let the drive automatically set the best parameter settings for the selected application. The drive does
not initialize A1-02 when A1-03 = 2220, 3330.
• When A1-03 = 2220, 3330, the drive automatically set A1-05 [Password Setting] = 0000. Make sure that you set the password again
for applications where a password is necessary.
■
A1-04: Password
No.
Name
(Hex.)
A1-04 Password
(0104)
If the password entered in A1-04 does not agree with the password setting in A1-05, you cannot change these
parameters:
• A1-01 [Access Level Selection]
• A1-02 [Control Method Selection]
• A1-03 [Initialize Parameters]
• A1-06 [Application Preset]
• A1-07 [DriveWorksEZ Function Selection]
• A2-01 to A2-32 [User Parameter 1 to 32]
678
Table 11.2
Language Selection
Control Method Selection
DriveWorksEZ Function Selection
V/f Pattern Selection
PM Motor Code Selection
PM Motor Rated Power (kW)
PM Motor Rated Current (FLA)
PM Motor Pole Count
PM Motor Resistance (ohms/phase)
PM d-axis Inductance (mH/phase)
PM q-axis Inductance (mH/phase)
PM Back-EMF Vpeak (mV/(rad/s))
Encoder Z-Pulse Offset
PM Back-EMF L-L Vrms (mV/rpm)
Polarity Estimation Timeout
Comm Parameter Reset @Initialize
Communication Option Parameters
Set F6-08 = 1 [Comm Parameter Reset @Initialize = Reset Back to Factory Default] to
initialize communication option card parameters.
Installation Method Selection
Drive Model (KVA) Selection
DriveWorksEZ Parameters
DWEZ Connection 1-20
V/f CL-V/f OLV CLV AOLV
Entry point for the password set in A1-05 [Password Setting]. The user can
view the settings of parameters that are locked without entering the
password. Enter the correct password in this parameter to change parameter
settings.
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
when A1-03 = 2220, 3330.
Name
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Default
(Range)
0000
(0000 - 9999)