YASKAWA GA700 Technical Manual page 929

■
H5-09: CE Detection Time
No.
Name
(Hex.)
H5-09 CE Detection Time
(0435)
■
H5-10: Modbus Register 0025H Unit Sel
No.
Name
(Hex.)
H5-10 Modbus Register
0025H Unit Sel
(0436)
0 : 0.1 V units
1 : 1 V units
■
H5-11: Comm ENTER Command Mode
No.
Name
(Hex.)
H5-11 Comm ENTER
Command Mode
(043C)
0 : ENTER Command Required
You must use the Enter command to enable changes to parameters. Make all parameter changes then input the
Enter command.
1 : ENTER Command Not Required
It is not necessary to input the Enter command to change parameters.
■
H5-12: Run Command Method Selection
No.
Name
(Hex.)
H5-12 Run Command
Method Selection
(043D)
0 : FWD/Stop, REV/Stop
The drive uses bit 0 in command data 0001H of the MEMOBUS register in the motor forward Run command (bit
0 = 1) and the stop command (bit 0 = 0). The drive uses bit 1 in the motor reverse Run command (bit 1 = 1) and
the stop command (bit 1 = 0).
1 : Run/Stop, FWD/REV
The drive uses bit 0 in command data 0001H of the MEMOBUS register in the motor Run command (bit 0 = 1)
and the stop command (bit 0 = 0). The drive uses bit 1 in the direction of motor rotation command (Forward run
(bit1 = 0) or Reverse run (bit 1 = 1)).
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
Figure 11.116 Drive Transmit Wait Time
V/f CL-V/f OLV CLV AOLV
Sets the detection time for CE [Modbus Communication Error] issues when
communication stops.
V/f CL-V/f OLV CLV AOLV
Sets the unit of measure used for the MEMOBUS/Modbus communications
monitor register 0025H (output voltage reference monitor).
V/f CL-V/f OLV CLV AOLV
Sets the function to make the Enter command necessary to change
parameters through MEMOBUS/Modbus communications.
V/f CL-V/f OLV CLV AOLV
Sets the input method for the Run command when b1-02 = 2 [Run
Command Selection 1 = Memobus/Modbus Communications] or b1-16 = 2
[Run Command Selection 2 = Memobus/Modbus Communications].
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
11.8 H: Terminal Functions
Default
(Range)
2.0 s
(0.0 - 10.0 s)
Default
(Range)
0
(0, 1)
Default
(Range)
0
(0, 1)
Default
(Range)
0
(0, 1)
11
929