Set Monitoring Items To Be Shown As A Trend Plot - YASKAWA GA700 Technical Manual

3.6 Keypad Operation
4.
Push or
It will be displayed as follows.
◆

Set Monitoring Items to be Shown as a Trend Plot

You must set the items in this figure to display as a trend plot.
A - Monitor Parameter 1 (set with
B - Monitor Parameter 2 (set with
C - Trend Plot 2 Scale Maximum/
■
Select Monitor Items to Show as a Trend Plot
The procedure in this section shows how to show the frequency reference monitor as a trend plot.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on
2.
Push (Menu).
3.
Push or
162
to select [Analog Gauge], then push
[Custom Monitor 1])
[Custom Monitor 2])
Minimum Value
, push (Back) to show [Home] on
to select [Monitors], then push
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
.
D - Trend Plot Time Scale
E - Trend Plot 1 Scale Maximum/
Minimum Value
.
.