YASKAWA GA700 Technical Manual page 349

Code Name
oFA12 to Option Card Connection
oFA17 Error (CN5-A)
Note:
Do a Fault Reset to clear the fault.
Code Name
oFA30 to Communication Option
oFA43 Card Connection Error
(CN5-A)
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb00 Option Not Compatible
with Port
Note:
• Do a Fault Reset to clear the fault.
• Fault trace is not available for this fault.
Code Name
oFb01 Option Fault/Connection
Error
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb02 Duplicate Options
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb03 to Option Card Error Occurred
oFb11 at Option Port CN5-B
Note:
Do a Fault Reset to clear the fault.
Code Name
oFb12 to Option Card Error Occurred
oFb17 at Option Port CN5-B
Note:
Do a Fault Reset to clear the fault.
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Causes
The option card connected to connector
CN5-B is not compatible.
Causes
The option card connected to connector
CN5-B was changed during operation.
Causes
The same option cards or the same type
of option cards are connected to
connectors CN5-A, B, and C.
Causes
A fault occurred in the option card.
Causes
A fault occurred in the option card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly
connected to the connector.
3. If the problem continues, replace the option
card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly
connected to the connector.
3. If the problem continues, replace the option
card.
Possible Solutions
Connect the option card to the correct connector.
Note:
DO-A3, AO-A3, PG-B3, and PG-X3 options
can connect to connector CN5-B. Use connector
CN5-C when connecting only one encoder
option card.
Possible Solutions
1. De-energize the drive.
2. Refer to the option card manual and correctly
connect the option card to the connector on the
drive.
Possible Solutions
Connect the option card to the correct connector.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly
connected to the connector.
3. If the problem continues, replace the option
card.
Possible Solutions
1. De-energize the drive.
2. Make sure that the option card is correctly
connected to the connector.
3. If the problem continues, replace the option
card.
6.4 Faults
6
349