YASKAWA GA700 Technical Manual page 422

7.4 Replace a Cooling Fan and Circulation Fan
A - Cooling Fan
B - Fan unit base
Note:
When you install the cooling fan, make sure that you do not pinch cables between the cooling fan and the fan unit base.
3.
Put the fan unit into the specified location and use screws to safety it to the drive.
Tighten the screws to a tightening torque of 0.98 N∙m to 1.33 N∙m (8.67 lb.∙in. to 11.77 lb.∙in.).
422
C - Alignment pin on fan unit base
Figure 7.46 Install the Cooling Fan
Figure 7.47 Install the Fan Unit
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual