YASKAWA GA700 Technical Manual page 894

11.8 H: Terminal Functions
The drive ramps to stop in the set deceleration time. Fault relay output terminal MA-MC activates and terminal
MB-MC deactivates.
1 : Coast to Stop
The drive output shuts off and the motor coasts to stop. Fault relay output terminal MA-MC activates and terminal
MB-MC deactivates.
2 : Fast Stop (Use C1-09)
The drive stops the motor in the deceleration time set in C1-09 [Fast Stop Time]. Fault relay output terminal MA-
MC activates and terminal MB-MC deactivates.
3 : Alarm Only
The keypad shows "CP2" and the drive continues operation at the current frequency reference.
Note:
The output terminal set for Alarm [H2-01 to H2-03 = 10] activates.
4 : Digital Output Only
■
H2-36: Comparator 1 Ineffective Time
No.
Name
(Hex.)
H2-36 Comparator 1
Ineffective Time
(159E)
Note:
• After you enter a Run command and wait for the time set in this parameter, the drive will monitor operation and make sure that it is in
the Comparator 1 range until you enter the Stop command.
• When CP1 detection is disabled, the drive will trigger a digital output.
■
H2-37: Comparator 2 Ineffective Time
No.
Name
(Hex.)
H2-37 Comparator 2
Ineffective Time
(159F)
Note:
• After you enter a Run command and wait for the time set in this parameter, the drive will monitor operation and make sure that it is in
the Comparator 2 range until you enter the Stop command.
• When CP2 detection is disabled, the drive will trigger a digital output.
■
H2-40: Mbus Reg 15E0h bit0 Output Func
No.
Name
(Hex.)
H2-40 Mbus Reg 15E0h bit0
Output Func
(0B58)
■
H2-41: Mbus Reg 15E0h bit1 Output Func
No.
Name
(Hex.)
H2-41 Mbus Reg 15E0h bit1
Output Func
(0B59)
■
H2-42: Mbus Reg 15E0h bit2 Output Func
No.
Name
(Hex.)
H2-42 Mbus Reg 15E0h bit2
Output Func
(0B5A)
894
V/f CL-V/f OLV CLV AOLV
Sets the length of time that CP1 [Comparator1 Limit Fault] is disabled.
V/f CL-V/f OLV CLV AOLV
Sets the length of time that CP2 [Comparator2 Limit Fault] is disabled.
V/f CL-V/f OLV CLV AOLV
Sets the MFDO for bit 0 of MEMOBUS register 15E0 (Hex.).
V/f CL-V/f OLV CLV AOLV
Sets the MFDO for bit 1 of MEMOBUS register 15E0 (Hex.).
V/f CL-V/f OLV CLV AOLV
Sets the MFDO for bit 2 of MEMOBUS register 15E0 (Hex.).
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Default
(Range)
0.0 s
(0.0 - 10.0 s)
Default
(Range)
0.0 s
(0.0 - 10.0 s)
Default
(Range)
F
(0 - 1A7)
Default
(Range)
F
(0 - 1A7)
Default
(Range)
F
(0 - 1A7)