YASKAWA GA700 Technical Manual page 415

■
Remove a Fan
1.
To remove the fan finger guard from the drive, push the tabs on the left and right sides of it and pull up the
back side of the guard.
A - Fan finger guard
2.
Pull the cooling fan straight up from the drive. Disconnect the power supply connector and remove the fan
from the drive.
A - Cooling Fan
■
Install a Fan
Reverse the removal procedure to install a cooling fan.
1.
Connect the drive and the fan connector.
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual
Figure 7.27 Remove the Fan Finger Guard
Figure 7.28 Remove the Cooling Fan
Figure 7.29 Connect Connector
7.4 Replace a Cooling Fan and Circulation Fan
7
415