YASKAWA GA700 Technical Manual page 420

7.4 Replace a Cooling Fan and Circulation Fan
■
Remove Circulation Fans
Remove the drive cover.
CAUTION! Crush Hazard. Only loosen the cover screws. Do not fully remove the cover screws. Make sure that the covers do
not fall. Missing cover screws can cause the cover to fall and cause injury.
1.
Unplug the fan cable from the hook.
A - Fan unit
B - Hook
2.
Loosen the fan unit screws and slide the fan unit to the right.
Note:
To remove the fan unit, it is only necessary to loosen the screws.
A - Fan unit
420
C - Fan cable
Figure 7.41 Circulation Fan Components
A
Figure 7.42 Slide the Fan Unit
YASKAWA ELECTRIC SIEP C710617 05F YASKAWA AC Drive GA700 Technical Manual