Table of Contents
Advertisement
3 Startup Procedure and Test Run
Note:
• Always stop the motor before making a backup of the parameters.
• While making a backup, the drive will not accept Run commands.
1.
Push
(Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not on
, push
2.
Push
(Menu).
3.
Push
or
to select [Parameter Backup/Restore], then push
4.
Push
or
to select the items to back up, then push
5.
Push
or
to select [Backup (drive → keypad)], then push
6.
Push
or
to select a memory location, then push
The keypad shows "End" when the backup procedure completes successfully.
■
Write Backed-up Parameters to the Drive
Users can write the parameters backed up on the keypad to another drive.
Note:
• Always stop the drive before starting the restoration procedure for parameter backups.
• The drive rejects a Run command while restoring parameters.
138
(Back) to show [Home] on
YASKAWA ELECTRIC SIEP C710617 19A YASKAWA AC Drive CR700 Technical Manual
.
.
.
.
.
Advertisement
Table of Contents
