New Holland WorkMaster 50 Service Manual page 563

Power Take-Off (PTO) speed sensor - Remove
1. Remove the fender from left side of the tractor. See
Fenders and guards - Remove (90.116).
2. Loosen the bolts (1).
3. Lift the plate (1) access the wire connector.
4. Disconnect the wiring (2).
5. Loosen the bolts (1) and remove the sensor assem-
bly.
6. Loosen the nut (2) and remove the PTO sensor.
Electrical systems - Rear Power Take-Off (PTO) control system
47866583_ 02/12/2015
55.3 [55.048] / 4
1
GNIL14TR00840AA
2
GNIL14TR00838AA
3
GNIL14TR00839AA