Table of Contents
Advertisement
Non-powered front axle - Install
Reinstall the front axle assembly to carrier observing
the following:
1. Reassembly follows disassembly procedure in reverse,
refer to Non-powered front axle - Remove (25.400).
CAUTION
Pinch hazard!
Always use suitable tools to align mating parts.
DO NOT use your hand or fingers.
Failure to comply could result in minor or mod-
erate injury.
2. Check the pivot pin play. It should not exceed 0.25 mm
(0.01 in). If play is more, add shims between axle car-
rier and centre beam.
3. Check for correct toe-in setting. See "front wheel set-
ting tests" for details.
4. Tighten all fasteners to correct torques.
Front axle system - Non-powered front axle
C0044A
47866583_ 02/12/2015
25.5 [25.400] / 10
Hide quick links:
Advertisement
Chapters
Table of Contents
