New Holland WorkMaster 50 Service Manual page 151

Mechanical transmission external controls - Adjust
Shuttle interlock cable
1. Measure dimension (A) at cable end as shown in figure
1. (Top of nut to bottom of threads). The desired length
of (A) is approximately 26.000 mm (1.024 in), adjust if
required.
2. At the opposite cable end, count the number of visible
threads (B), there should be 6 or 7. Thread length can
be changed by adjusting the nuts on either side of cable
mounting bracket (C).
3. Adjust the nuts so that the shuttle lever starts to move
when clutch pedal is depressed beyond free play 50.00
- 55.00 mm (1.97 - 2.17 in) from rest) and then tighten.
Transmission - Mechanical transmission external controls
47866583_ 02/12/2015
21.2 [21.130] / 4
1
GNIL14TR04225AB
2
GNIL14TR04226AB