New Holland WorkMaster 50 Service Manual page 232

27. Remove the bolts fixing the bevel drive-differential
support to the axle casing.
28. Screw in the M12 x 100 dowels, tool no 380002814
(1).
29. Remove the remaining bolts and separate the bevel
drive-differential support from the axle casing.
30. Attach a chain (2) to the support and take up the
weight with the hoist.
31. Remove the bevel drive-differential support (3) from
the axle casing.
32. Remove the two bolts (1) from the two ring gear
differential support caps (2).
33. Remove the crown wheel-differential assembly
from the housing.
34. Remove the snap ring (1) from the splined shaft (2).
35. Straighten the locking tab on the splined shaft lock
nut (1).
Front axle system - Powered front axle
47866583_ 02/12/2015
25.1 [25.100] / 23
17
GNIL14TR04384AB
18
GNIL14TR04385AB
19
GNIL14TR04386AB
20
GNIL14TR04387AB