New Holland WorkMaster 50 Service Manual page 299

13. Loosen the bolts (1) and remove ROPS.
14. Wrap suitable chain or nylon rope on the final drive
housing (1) and connect it to a hoist. Loosen attaching
bolts and remove the entire final drive.
15. Repeat for the final drive housing on the other side.
16. Remove the cover plate by removing Allen screw (1)
and remove cover plate (2). Retrieve oil rings 2 num-
bers from the housing and cover plate respectively.
17. Loosen the bolts securing hydraulic lift housing to
transmission housing. Lift the hydraulic lift assembly
using suitable hoist and place it on a flat surfaced
table.
18. Remove Power Take-Off (PTO) engaging levers and
differential lock.
Rear axle system - Rear bevel gear set and differential
47866583_ 02/12/2015
27.2 [27.106] / 10
11
GNIL14TR04251AA
12
GNIL14TR04253AB
13
GNIL14TR04255AA